Modified on Tue, 27 Jan at 9:25 AM

Hollywood Destination eBike Rack | User Guide

In this article: You’ll learn how to assemble and install the Hollywood Destination eBike rack for electric bikes onto your vehicle’s hitch.

This Article Applies to the Following Bikes

Difficulty

★★☆ Medium

Estimated Time

20 - 30 Min

Before You Start

Tools you will need

• Wrenches (included in your bike rack kit)

Preparation

• Make sure you have enough open space in your garage or workspace to lay out and assemble the rack components.
• Ensure your vehicle has a compatible hitch receiver so you can install the rack securely.
• Park your vehicle on a level surface, engage the parking brake, and turn the vehicle off before starting.

Watch the Full Step-by-Step Video Guide

Manufacturer Installation Instructions

For full and detailed assembly instructions, please follow the official installation guide provided by Hollywood Racks. Their documentation includes the most current steps, diagrams, and safety guidance for proper installation.

View the manufacturer’s assembly guide here.

FAQs

• Is the 70lbs weight limit a suggestion or a max weight limit?
  Do not exceed the strict 70 lbs per bike max weight limit.
• Is the bike ramp included in the box or is it sold separately?
  The bike removable and expandable ramp is included in the box
• Do you need a Bike Adapter for step-through bikes on this bike rack?
  No, You would not need a bike adapter. It has frame grabbers that allow you to attach the bike from the seat post, eliminating the need for a bike adapter.
• How many bikes can this rack carry?
  It can carry up to 2 bicycles.
• Where can I store the ramp?
  The best spot to store the ramp is in the trunk of the car. We didn’t want to have the ramp attach to the rack somehow as that opens up the possibility of the ramp falling off if not secured properly.
• There’s a long rod left after the rack is built.  What is that for?
  This rod is an extra piece to turn the long removable grabber arm into an attached grabber arm (like the short grabber arm). This is an option some people prefer, so we include the part.
• My car has a 1.25” hitch, do you make a version of the Destination E that fits my car?
  No, we only offer the Destination E in a 2” hitch option. We do not recommend a hitch reducer either. If you need a 1.25” rack, look at the Sport Rider.

Warning

⚠️ Important Safety & Liability Notice

Always ensure the rack is properly installed and securely attached to your vehicle’s hitch before loading bikes or driving. Check that all hitch pins, clamps, straps, and locking mechanisms are fully tightened.

Do not exceed the rack’s weight capacity or your vehicle hitch’s rated load. Improper installation, loose hardware, or overloading may result in rack failure, bike damage, or injury.

Recheck all connections before each trip and periodically during long drives, especially after rough roads.