Modified on Fri, 3 Oct at 3:39 PM
MOD Connect - User Guide
In this article: You will pair your Lumos Helmet with your MOD V3 to enable turn signal functionality.
Difficulty
★☆☆ Easy
Estimated Time
5 - 10 Min
Before You Start
Tools you will need
No Tools Needed
Preparation
Ensure your bike is fully charged
Ensure the Lumos helmet is fully charged
Watch the Video Tutorial
Prefer to watch? Check out our quick video guide:
Follow our MOD Connect Setup Video Guide or the steps below for a visual step-by-step of how to connect the Lumos Ultra helmet to your MOD BIKE.
Steps
Step 1: Download and open the Lumos App
On your phone, open the App Store or Google Play, search “Ride Lumos,” install, then open.
Step 2: Pair and Update Helmet Firmware
Follow the prompts until the app shows Connected. If prompted, install the firmware update to 100%, then close the Lumos App.
Step 3: Turn on your MOD BIKE
Press and hold the i button until the bike display powers on.
Step 4: Put the helmet in pairing mode
Press and hold the helmet power button for 3 seconds until the orange lights flash.
Step 5: Open the bike Menu
On the handlebar control, press + and - together to open Menu.
Step 6: Go to Setup
Use the controls to highlight Setup and select it.
Step 7: Select Bind Helmet
In the Setup menu, choose Bind Helmet.
Step 8: Select Bind New Helmet
Choose Bind New Helmet to start scanning for helmets.
Step 9: Choose your helmet from the list
Select the serial number displayed on screen.
Step 10: Confirm the connection
Look for the helmet icon next to the battery level.
Troubleshooting
Helmet will not pair / stuck on initializing → Ensure the helmet firmware is up to date. Retry binding 2–4 times.
Intermittent connectivity → Go back to the Bind Helmet setting and reconnect 2–4 times.
⚠️ Note: The Lumos helmet can only connect to one Bluetooth device at a time. If it is still paired with your phone, your MOD Bike will not connect.
FAQs
- Can I still use the Lumos App once I connect to my MOD BIKE?
No. The helmet can only connect to one Bluetooth device at a time. Once paired to your MOD Bike, the Lumos App must remain disconnected. Can I use Lumos helmets with older MOD BIKE models?
Only V3 models and later support Bluetooth helmet pairing. For earlier models, use the included Lumos remote.
Warning
⚠️ Important Safety & Liability Notice
These instructions are provided as a general guide for MOD BIKES products. Always ensure that all screws, bolts, and fasteners are properly tightened and secured before riding. Improper assembly or maintenance may result in damage, injury, or voiding of warranty.
If you are not confident performing these steps, please seek assistance from a qualified MOD BIKES technician or authorized service provider. MOD BIKES shall not be held liable for injury, damage, or loss caused by improper use, assembly, or failure to follow these guidelines. Local laws and regulations may apply.
Still Need Help?
Click here to create a new support ticket. A member of our team will contact you within 24 to 48 hours.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article